Corega CG-WLBARGO Manual do Utilizador

E-Guard 802.11 b/g Wireless IP Camera With pan/tilt function Model : IC502w User Manual Mundo Digital Guatemala http://www.digimundos.com Revision

E-Guard IC502w constant red light to indicate this good connection status. If the LED is blinking, please refer to section 3.3~3.5 to try other networ

E-Guard IC502w Figure 2-5: The installation CD disk Third, Use CamView program to see the video Figure 2-5 is the running window of the CamView pro

E-Guard IC502w Seeing the video in a remote location After the IP CAM is installed and you can see the video from the CamView software in the local

E-Guard IC502w 2.3. Wireless connection The IP CAM can also be connected to the home/office network through the 802.11 b/g wireless connection. Ther

E-Guard IC502w Figure 2-9: Unplug the Ethernet cable to enable the WiFi function 14

E-Guard IC502w 3. Web configurations You can login into the web configuration page by directly key-in the IP address of the IP CAM or right-click the

E-Guard IC502w 3.1. Information The first page of the web configuration of the IP CAM IC502w is the information page. You can see the model name/fir

E-Guard IC502w 3.2. Video Display This display page allows you to view the video display and control the pan/tilt movement of the IP camera. For the f

E-Guard IC502w updated accordingly. You can click the (x,y) axis of the patrol point to direct the view to this specific patrol point directly. After

E-Guard IC502w 3.3. Network The Network page allows you to modify the network settings of the wired Ethernet. The default settings use DHCP to obtai

E-Guard IC502w Table of Contents 1. INTRODUCTION...

E-Guard IC502w Figure 3-6: Network settings page for fixed IP address 20

E-Guard IC502w 3.4. WiFi security You can use the wireless to connect the IP CAM to the network. If your network environment has a 802.11 b/g router

E-Guard IC502w All the fields in this page must be filled correctly with the same settings the wireless router or AP using. Figure 3-8: WiFi securi

E-Guard IC502w Figure 3-9: WiFi testing page 23

E-Guard IC502w 3.5. Advanced Network In some special situation, your network environment only provides PPPoE connection(ADSL service), there is no N

E-Guard IC502w 3.6. Video Settings The IP CAM is designed to provide high quality video for viewing from CamView software. In this page, you cam mod

E-Guard IC502w very vague. For indoor usage, if there is strong sun light into the room, please select the “Indoor+sun light” choice. 12. Enable/dis

E-Guard IC502w 3.7. 3GPP/RTSP settings The IP CAM is able to be viewed from a 3G mobile phone, for detailed settings on the 3G mobile phone, please

E-Guard IC502w 3.8. Motion Detection The IP CAM provides the motion detection function, you can enable the motion detection ability in this page, th

E-Guard IC502w The default setting is “Disable Motion Detection”. Figure 3-13: Motion detection enabled page 29

E-Guard IC502w APPENDIX F. THIRD PARTY AND EMBEDDED WEB PAGE INTEGRATION...50 3

E-Guard IC502w 3.9. SD-card record control The IP camera has a micro-SD card slot that users could insert micro-SD card into the IP camera for video r

E-Guard IC502w 3.10. Micro-SD card recorded files display The recorded files on the micro-SD card could be displayed and downloaded on the “Recording

E-Guard IC502w 3.11. Led Display Control The IP CAM provides the Led Display Control function, you can enable or disable the led display/indication

E-Guard IC502w 3.12. Date/Time The IP CAM can synchronize the date/time with the universally available time server( for example stdtime.gov.tw) thro

E-Guard IC502w 3.13. Admin In this page, you can modify the web login account. With this account, you can login to the IP CAM and do any modificatio

E-Guard IC502w 3.14. Upgrade If there is some new firmware available from the supplier of this IP CAM, you can upgrade the firmware on this page. Pl

E-Guard IC502w Figure 3-20: Firmware upgrade status page 36

E-Guard IC502w 3.15. Reboot You can restart the IP CAM manually on this page. All the connected video viewing users will be disconnected. Figure

E-Guard IC502w 3.16. Safe Mode If by some abnormal operation, for example, powered off during the critical point of the upgrade procedure, the IP CA

E-Guard IC502w 3.17. Set to factory default For some reason, for example you forgot the web login password, you may want to set the IP CAM to the f

E-Guard IC502w List of Figures and Tables Figure 2-1: Major components in the front panel Figure 2-2: Major components in the back panel Figure 2-3: I

E-Guard IC502w Figure 5-5: Installation CD Figure 5-6: ID/Password Card Table A-1: List of tested Wireless AP/router devices Table A-2: Lis

E-Guard IC502w 1. Introduction The IC502w IP Camera is designed with the “user-friendly” idea deep in mind. The user can install the IC502w easily on

E-Guard IC502w ♦ UPnP support in router ? No ♦ What’s needed ? ID and Password 7

E-Guard IC502w 2. Hardware description and quick installation/usage The IP CAM is designed to be very easy to install and use. First, let’s see the m

E-Guard IC502w 3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the Ethernet link is ok, the Ethernet indication LED on