Corega CG-WLBARGO Especificações descarregar pdf (Página 6)

Model IP901 Weatherproof Day/Night Network IP Camera

2. Hardware description and quick installation/usage

The IP CAM is designed to be very easy to install and use. First, let’s see the major

components of the IP CAM products.

2.1. Major hardware components.

The major components of the IP CAM products are listed below :

1. Lens – the focus of the lens is fixed, you do not need to spend time to adjust the focus, the

effective focus range is from 30cm to infinity.

2. IR LEDs – there are totally 40 IR LEDs that can provide approximately 30m distance night

vision.

3. EDS – this light detector can detect when the light is becoming dark and turn on the IR

LEDs automatically.

4. DC Power Connector – this is the place to plug in the power adaptor. The power needed for

this IP CAM is 12V/1.0A, please make sure you are using the correct power adaptor.

5. Network Cable Connector – this is the place to plug in the RJ45 Ethernet cable.

6. Reset button – this is the button to reset the IP CAM to default factory settings. You need to

press the reset button for more than 4 seconds to enable the reset function. Usually when

you forgot the administrator account, you will probably need to do this reset action to reset

to the default factory settings. Please refer to section 3.16 for more details.

IR LED Lens

EDS

Figure 2-1: Major components of the IP camera

1 2 3 4 5 6 7 8 9 10 11 ... 37 38

Sem comentários

Corega CG-WLBARGO Especificações Página 6